康国政的个人简介
康国政，1969年8月8日出生于贵州遵义。固体力学博士，教授，博士生导师，西南交通大学力学与工程学院院长，牵引动力国家重点实验室主任，国家级力学实验示范中心主任。
康国政于1987年9月至1992年7月在清华大学材料工程系金属材料及热处理专业就读大学本科。1994年3月至1997年12月在西南交通大学应用力学与工程系固体力学专业攻读博士学位。1997年12月至2003年7月担任西南交通大学应用力学与工程系讲师、副教授。2010任西南交通大学力学与工程学院院长。
康国政长期致力于材料循环本构关系与疲劳失效行为以及结构服役安全性分析，揭示了多种材料的循环变形特征和疲劳失效行为，建立了新的材料本构关系和疲劳失效模型。
人物经历
1969年8月8日，康国政出生于贵州遵义。
1987年9月至1992年7月，在清华大学材料工程系金属材料及热处理专业就读大学本科。
1992年9月至1994年2月，在西南交通大学材料系金属材料专业攻读硕士学位。
1994年3月至1997年12月，在西南交通大学应用力学与工程系固体力学专业攻读博士学位。
1997年12月至2003年7月，担任西南交通大学应用力学与工程系讲师、副教授。
2001年9月至2002年9日，在本名古屋大学微系统工程系进行访问学者合作研究。
2003年7月至2005年7月，担任西南交通大学应用力学与工程系教授、系副主任。
2005年，入选教育部新世纪优秀人才支持计划；同年，入选四川省杰出青年学术带头人培养计划。
2005年7月至2008年6月，担任西南交通大学应用力学与工程系教授、博士生导师、系副主任。
2007年，入选西南交通大学“扬华之星”高层次人才培养计划。
2008年7月至2015年1月，担任西南交通大学力学与工程学院教授、博士生导师、副院长、院长（2010）。
2008年11月至2009年1月，担任澳大利亚Monash大学机械与航空工程系访问教授。
2009年10月至2010年9月，担任德国Bochum鲁尔大学连续统力学研究所“洪堡”高级研究员。
2010年，获得国家杰出青年基金。
2011年11月至2011年11月，担任香港科技大学机械系访问教授（7天）。
2012年3月至2012年9月，担任德国Siegen大学土木系结构力学研究所“洪堡”高级研究员。
2014年12月至2014年12月，担任新加坡南洋理工大学机械与航空系访问教授（7天）。
2015年1月，担任西南交通大学牵引动力国家重点实验室主任、力学与工程学院院长。
主要成就
科研成就 科研综述康国政主要研究领域为复杂加载和环境下的材料本构关系及其有限元实现研究；疲劳与断裂；复合材料细观力学研究；工程结构的有限元分析。长期致力于材料循环本构关系与疲劳失效行为以及结构服役安全性分析，揭示了多种材料的循环变形特征和疲劳失效行为，建立了新的材料本构关系和疲劳失效模型。
承担项目截至2016年6月，康国政主持国家自然科学基金等国家级项目8项、省部级基金项目12项；在先进材料的循环本构理论和相关疲劳失效问题研究方面取得了一系列创新性的成果。
代表性科研项目项目级别项目名称国家自然科学基金项目形状记忆合金热-力耦合循环变形和疲劳失效行为的宏微观实验和理论研究介电高弹体热-力-电耦合循环大变形行为的实验和理论研究国家级项目神华重载铁路货车状态检修成套技术研究及装备研制-关键零部件剩余寿命预测模型及车辆子系统评判方法研究CRH380型动车组动力学性能优化分析项目滚压试验车轮滚动接触疲劳三维有限元分析纤维增强塑料螺纹棒疲劳实验GH4169高温合金循环粘塑性本构模型研究项目热塑性聚合物材料的湿-热-力耦合循环本构关系研究省级项目高速列车车轮滚动接触疲劳研究参考资料：学术论文
根据2020年3月西南交通大学官网显示，康国政已在《International Journal of Plasticity》《Journal of the Mechanics and Physics of Solids》《力学学报》《固体力学学报》《工程力学》《应用力学学报》等期刊和国内外学术会议上发表论文300余篇，其中被SCI收录200余篇、被EI收录280余篇，被SCI他人引用2000余次，H指数=31，Google学术引用5200余次。
1. 康国政, Theory of dislocation loops in multilayered anisotropic solids with magneto-electro-elastic couplings, Journal of Mechanics and Physics of Solids, 2019 （SCI ）
2. 康国政, Numerical study on toughening mechanism of bulk metallic glass composites from martensite transformation of toughening phase, Journal of Non-Crystalline Solids, 2019 （SCI ）
3. 康国政, Phase field simulation to one-way shape memory effect of NiTi shape memory alloy single crystal, Computational Materials Science, 2019 （SCI ）
4. 康国政, Effect of crystalline content on ratchetting of ultra-high molecular weight polyethylene polymers: experimental investigation and constitutive model, Mechanics of Materials, 2019 （SCI ）
5. 康国政, A meso-mechanical constitutive model for the bulk metallic glass composites with considering the local failure of matrix, International Journal of Plasticity, 2019 （SCI ）
6. 康国政, Phase field modeling to transformation induced plasticity in super-elastic NiTi shape memory alloy single crystal, Modelling and Simulation in Materials Science and Engineering, 2019 （SCI ）
7. 康国政, The Kitagawa-Takahashi diagram to hybrid welded AA7050 joints via synchrotron X-ray tomography, International Journal of Fatigue, 2019 （SCI ）
8. 康国政, Modelling the martensite reorientation and resulting zero/negative thermal expansion of shape memory alloys, Journal of Mechanics and Physics of Solids, 2019 （SCI ）
9. 康国政, Mean-field homogenization of elasto-viscoplastic composites based on a new mapping-tangent linearization approach, SCIENCE CHINA Technological Sciences, 2019 （SCI ）
10. 康国政, Torsional whole-life transformation ratchetting under pure-torsional and non-proportional multiaxial cyclic loadings of NiTi SMA at human-body temperature: Experimental observations and life-prediction model, Journal of the Mechanical Behavior of Biomedical Materials, 2019 （SCI ）
11. 康国政, A micromechanical constitutive model for unusual temperature-dependent deformation of Mg-NiTi composites, International Journal of Solids and Structures, 2019 （SCI ）
12. 康国政, A 3D thermo-mechanically coupled model for describing rate-dependent super-elastic degeneration of NiTi shape memory alloys,, Mechanics Research Communications, 2019 （SCI ）
13. 康国政, A review of magneto-elastic interaction and its theoretical descriptions in type-II superconductors, Journal of Superconductivity and Novel Magnetism, 2019 （SCI ）
14. 康国政, Rate-dependent transformation ratcheting-fatigue interaction of super-elastic NiTi alloy under uniaxial and torsional loadings: Experimental observation, International Journal of Fatigue, 2019 （SCI ）
15. 康国政, A three-dimensional constitutive model for magneto-mechanical deformation of NiMnGa ferromagnetic shape memory alloy single crystals, Acta Mechanica Sinica, 2019 （SCI ）
16. 康国政, Damage tolerance assessment of a brake unit bracket for high-speed railway welded bogie frames, Chinese Journal of Mechanical Engineering, 2019 （SCI ）
17. 康国政, First-order pinning interaction in type-II superconductors with Ginzburgu2013Landau descriptions, The European Physical Journal B, 2019 （SCI ）
18. 康国政, Effect of twin boundary orientation on the mechanical properties of bicrystalline copper micropillars,, Acta Materialia, 2019 （SCI ）
19. 康国政, Experimental study on pure-shear-like cyclic deformation of VHB 4910 dielectric elastomer, Journal of Polymer Research, 2019 （SCI ）
20. 康国政, Thermo-elastic-viscoplastic -damage model for self-heating and mechanical behavior of thermoplastic polymers, International Journal of Plasticity, 2019 （SCI ）
21. 康国政, Experimental investigation on the thermo-mechanical cyclic degeneration of one-way shape memory effect of NiTi shape memory alloy, , 2019
22. 康国政, Dynamic photomask-assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator, Advanced Functional Materials, 2019 （SCI ）
23. 康国政, Transformation ratchetting of nanocrystalline super-elastic NiTi shape memory alloy and its atomic mechanism from molecular dynamics simulations, International Journal of Plasticity, 2019
24. 康国政, A crystal plasticity based constitutive model for uniaxial ratchetting of magnesium alloys considering dislocation slipping, twinning and detwinning mechanisms, , 2019
25. 康国政, Experimental investigation on electro-mechanically coupled cyclic deformation of laterally-constrained dielectric elastomer, , 2019
26. 康国政, A crystal plasticity based constitutive model accounting for R phase and two-step phase transition of polycrystalline NiTi shape memory alloys, International Journal of Solids and Structures, 2019 （SCI ）
27. 康国政, A crystal plasticity based constitutive model for uniaxial ratchetting of magnesium alloys considering dislocation slipping, twinning and detwinning mechanisms, International Journal of Mechanical Sciences, 2019 （SCI ）
28. 康国政, Modeling the anisotropic elastocaloric effect of textured NiMnGa ferromagnetic shape memory alloys, International Journal of Solids and Structures, 2019 （SCI ）
29. 康国政, Experimental study on rate-dependent uniaxial whole-life ratchetting and fatigue behavior of polyamide 6, International Journal of Fatigue, 2019
30. 康国政, Multiple mechanism based constitutive modeling of gradient nanograined material, International Journal of Plasticity, 2019 （SCI ）
31. 康国政, Experimental investigation on the thermo-mechanical cyclic degeneration of one-way shape memory effect of NiTi shape memory alloy, International Journal of Minerals, Metallurgy and Materials, 2019 （SCI ）
32. 康国政, Plastic deformation of a film-substrate with inhomogeneous inclusions under contact loading, Acta Mechanica, 2019 （SCI ）
33. 康国政, Effect of charging hydrogen on the tensile properties of A7N01 aluminum alloy friction stir welded joints, International Journal of Modern Physics B, 2019 （SCI ）
34. 康国政, In situ observation on rate-dependent strain localization of thermo-induced shape memory polyurethane, Polymers, 2019 （SCI ）
35. 康国政, Analytical model of friction behavior during polymer scratching with conical tip, Friction, 2019 （SCI ）
36. 康国政, A microplane constitutive model for martensite transformation and reorientation in shape memory alloys under non-proportional multiaxial loading, International Journal of Mechanical Science, 2019 （SCI ）
37. 康国政, Thermal activation based constitutive model for high-temperature dynamic deformation of AZ31B magnesium alloy, Materials Science and Engineering A, 2019 （SCI ）
38. 康国政, Deformation mechanisms based constitutive modelling and strength-ductility mapping of gradient nano-grained materials, Materials Science and Engineering A, 2019 （SCI ）
39. 康国政, Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper, International Journal of Plasticity, 2019 （SCI ）
40. 康国政, Theory of adhesive contact on multi-ferroic composite materials: Spherical indenter, International Journal of Engineering Science, 2019 （SCI ）
41. 康国政, Experimental investigation on temperature-dependent uniaxial cyclic deformation of AZ31B magnesium alloy, International Journal of Fatigue, 2019 （SCI ）
42. 康国政, High fatigue life and cooling efficiency of NiTi shape memory alloy under cyclic compression, Scripta Materialia, 2019 （SCI ）
43. 康国政, Investigation on the anisotropic transformation surfaces of super-elastic NiTi shape memory alloys under multiaxial cyclic loading conditions, Acta Mechanica Solida Sinica, 2018 （SCI ）
44. 康国政, Fatigue crack growth in cold-rolled and annealed polycrystalline superelastic NiTi alloys, Acta Mechanica Solida Sinica, 2018 （SCI ）
45. 康国政, A thermo-magneto-mechanically coupled constitutive model of magnetic shape memory alloys, Acta Mechanica Solida Sinica, 2018 （SCI ）
46. 康国政, On the residual life assessment of high-speed railway axles due to induction hardening, International Journal of Rail Transportation, 2018 （SCI ）
47. 康国政, A micromechanical model for the grain size dependent super-elasticity degeneration of NiTi shape memory alloys, Mechanics of Materials, 2018 （SCI ）
48. 康国政, A failure mechanism based constitutive model for bulk metallic glass, Mechanics of Materials, 2018 （SCI ）
49. 康国政, Experimental study on uniaxial ratchetting-fatigue interaction of polyamide-6, Polymer Testing, 2018 （SCI ）
50. 康国政, A multi-mechanism model describing reorientation and reorientation-induced plasticity of NiTi shape memory alloy, Acta Mechanica Solida Sinica, 2018 （SCI ）
51. 康国政, Thermo-mechanically coupled thermo-elasto-visco-plastic modeling of thermo-induced shape memory polyurethane at finite deformation, Acta Mechanica Solida Sinica, 2018 （SCI ）
52. 康国政, A variable-frequency bidirectional shear horizontal (SH) wave transducer based on dual face-shear (d24) piezoelectric wafers, Ultrasonics, 2018 （SCI ）
53. 康国政, Atomistic study on the super-elasticity of nanocrystalline NiTi shape memory alloy subjected to a cyclic deformation, Computational Materials Science, 2018 （SCI ）
54. 康国政, Uniaxial ratchetting of filled rubber: experiments and damage-coupled hyper-viscoelastic-plastic constitutive model, Journal of Applied Mechanics ASME, 2018 （SCI ）
55. 康国政, Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing, Soft Matter, 2018 （SCI ）
56. 康国政, A micromechanical constitutive model for grain size dependent thermo-mechanically coupled inelastic deformation of super-elastic NiTi shape memory alloy, International Journal of Plasticity, 2018 （SCI ）
57. 康国政, High-speed 3D printing of high-performance thermosetting polymers via two-stage curing, Macromolecular Rapid Communications, 2018 （SCI ）
58. 康国政, A constitutive model for grain size dependent deformation of NiTi polycrystalline shape memory alloys, International Journal of Mechanical Science, 2018 （SCI ）
59. 康国政, Axisymmetric thermo-elastic field in an infinite one-dimensional hexagonal quasi-crystal space containing a penny-shaped crack under anti-symmetric heat fluxes, Engineering Fracture Mechanics, 2018 （SCI ）
60. 康国政, Indentation on a transversely isotropic half-space of multiferroic composite medium with a circular contact region, International Journal of Engineering Science, 2018 （SCI ）
61. 康国政, Numerical simulation on the evolution of shear bands in bulk metallic glass composites under tension and compression, Composites Structures, 2018 （SCI ）
62. 康国政, Experimental and numerical investigations of evaluation criteria and material parameters'' coupling effect on polypropylene scratch, Polymer Engineering & Science, 2018 （SCI ）
63. 康国政, Phase field modeling for cyclic transformation of super-elastic NiTi shape memory single crystal, Computational Materials Science, 2018 （SCI ）
64. 康国政, Atomistic study on the super-elasticity of single crystal bulk NiTi shape memory alloy under adiabatic condition, Computational Materials Science, 2018 （SCI ）
65. 康国政, Experimental investigation on the heterogeneous ratchetting of SUS301L stainless steel butt weld joint during uniaxial cyclic loading, International Journal of Fatigue, 2017 （SCI ）
66. 康国政, Magneto-elastic coupling model of deformable anisotropic superconductors, EPL, 2017 （SCI ）
67. 康国政, Modeling of competition between shear yielding and crazing in amorphous polymersu2019 scratch, International Journal of Solids and Structures, 2017 （SCI ）
68. 康国政, Non-proportional multiaxial fatigue of super-elastic NiTi shape memory alloy micro-tubes: Damage evolution and life-prediction models, International Journal of Mechanical Sciences, 2017 （SCI ）
69. 康国政, Electric and magnetic polarization saturations for a thermally loaded penny-shaped crack in a magneto-electro-thermo-elastic medium, Smart Materials and Structures, 2017 （SCI ）
70. 康国政, Crack tip electric polarization saturation of a thermally loaded penny-shaped crack in an infinite thermo-piezo-elastic medium, International Journal of Solids and Structures, 2017 （SCI ）
71. 康国政, Three-dimensional fundamental solution of a penny-shaped crack in an infinite thermo-magneto-electro-elastic medium with transverse isotropy, International Journal of Mechanical Sciences, 2017 （SCI ）
72. 康国政, The competitive nucleation of misfit dislocation dipole and misfit extended dislocation dipole in nanocomposites, Acta Mechanica, 2017 （SCI ）
73. 康国政, A macroscopic multi-mechanism based constitutive model for the thermo-mechanical cyclic degeneration of shape memory effect of NiTi shape memory alloy, Acta Mechanica Sinica, 2017 （SCI ）
74. 康国政, A finite cyclic elasto-plastic constitutive model to improve the description of cyclic stress-strain hysteresis loops, International Journal of Plasticity, 2017 （SCI ）
75. 康国政, Non-proportional multiaxial ratchetting of ultrahigh molecular weight polyethylene polymer: experiments and constitutive model, Mechanics of Materials, 2017 （SCI ）
76. 康国政, Twinning-induced plasticity (TWIP) and work hardening in Ti-based metallic glass matrix composites, Scientific Reports, 2017 （SCI ）
77. 康国政, Three-dimensional exact magneto-electro-elastic field in an infinite transversely isotropic space with an elliptical crack under uniform loads: shear mode, International Journal of Engineering Sciences, 2017 （SCI ）
78. 康国政, Physical mechanism based crystal plasticity model of NiTi shape memory alloy addressing degeneration of shape memory effect during thermo-mechanical cyclic deformation, Mechanics of Materials, 2017 （SCI ）
79. 康国政, Dislocation-dynamics-based dynamic constitutive model of magnesium alloy, Acta Mechanica, 2017 （SCI ）
80. 康国政, A hygro-thermo-mechanical coupled cyclic constitutive model for polymers with considering glass transition, International Journal of Plasticity, 2017 （SCI ）
81. 康国政, Three-dimensional fundamental thermo-elastic field in an infinite space of two-dimensional hexagonal quasi-crystal with a penny-shaped/half-infinite plane crack, Theoretical and Applied Fracture Mechanics, 2017 （SCI ）
82. 康国政, Molecular dynamics simulations to the pseudo-elasticity of NiTi shape memory alloy nano-pillar subjected to cyclic compression, Computational Materials Science, 2017 （SCI ）
83. 康国政, Effects of peak stress and stress amplitude on multiaxial transformation ratchetting and fatigue life of superelastic NiTi SMA micro-tubes: Experiments and life-prediction model, International Journal of Fatigue, 2017 （SCI ）
84. 康国政, A thermo-mechanically coupled nonlinear viscoelastic-viscoplastic cyclic constitutive model for polymeric materials, Mechanics of Materials, 2017 （SCI ）
85. 康国政, Cyclic plastic strain based damage tolerance for railway axles in China, International Journal of Fatigu, 2016 （SCI ）
86. 康国政, Influence of third particle on the tribological behaviors of diamond-like carbon films, Scientific Reports, 2016 （SCI ）
87. 康国政, A rate-type nonlinear viscoelastic-viscoplastic cyclic constitutive model for polymers: theory and application, Polymer Engineering and Science, 2016 （SCI ）
88. 康国政, Crystal plasticity-based impact dynamic constitutive model of magnesium alloy, International Journal of Mechanical Sciences, 2016 （SCI ）
89. 康国政, Experimental study on the process of adiabatic shear fracture in isolated segment formation in high-speed machining of hardened steel, The International Journal of Advanced Manufacturing Technology, 2016 （SCI ）
90. 康国政, Vortex-lattice pinning and critical current density in anisotropic high-temperature superconductors, Superconductor Science and Technology, 2016 （SCI ）
91. 康国政, Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide 6 polymer, Polymer Testing, 2016 （SCI ）
92. 康国政, Meso-mechanical constitutive model of bulk metallic glass matrix composites, Mechanics of Materials, 2016 （SCI ）
93. 康国政, Temperature damage and constitutive model of frozen soil under dynamic loading, Mechanics of Materials, 2016 （SCI ）
94. 康国政, Axisymmetric thermo-elastic field in an infinite space containing a penny-shaped crack under uniform heat flux, International Journal of Mechanical Science, 2016 （SCI ）
95. 康国政, Time-dependent uniaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Viscoelastic-viscoplastic constitutive model, Journal of Applied Mechanics, 2016 （SCI ）
96. 康国政, Nonproportionally multiaxial cyclic deformation of AZ31 magnesium alloy: experimental observation, Materials Science and Engineering A, 2016 （SCI ）
97. 康国政, Observation on rate-dependent cyclic transformation domain of super-elastic NiTi shape memory alloy, Materials Science and Engineering A, 2016 （SCI ）
98. 康国政, Temperature-dependent uniaxial ratchetting of ultra-high molecular weight polyethylene, Fatigue & Fracture of Engineering Materials & Structures, 2016 （SCI ）
99. 康国政, Logarithmic rate based elasto-viscoplastic cyclic constitutive model for soft biological tissues, Journal of the Mechanical Behavior of Biomedical Materials, 2016 （SCI ）
100. 康国政, Study on the microstructure and stress fatigue failure mechanism of super-elastic NiTi shape memory alloy micro-tubes, Materials Science and Engineering A, 2016 （SCI ）
101. 康国政, Scaling rules for critical current density in anisotropic biaxial superconductors, Physica B: Condensed Matter, 2016 （SCI ）
102. 康国政, Effect of grain boundary segregation on the deformation mechanisms and mechanical properties of nanocrystalline binary aluminum alloys, Computational Materials Science, 2016 （SCI ）
103. 康国政, On adiabatic shear fracture in high-speed machining of a martensitic precipitation-hardening stainless steel, Journal of Materials Processing Technology, 2016 （SCI ）
104. 康国政, Observation on the transformation domains of super-elastic NiTi shape memory alloy and their evolutions during cyclic loading, Smart Materials and Structures, 2016 （SCI ）
105. 康国政, Experimental observations on rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy, Mechanics of Materials, 2016 （SCI ）
106. 康国政, A dynamic micromechanical constitutive model for frozen soil under impact loading, Acta Mechanica Solida Sinica, 2016 （SCI ）
107. 康国政, Steady-state thermo-elastic field in an infinite medium weakened by a penny-shaped crack: complete and exact solutions, International Journal of Solids and Structures, 2016 （SCI ）
108. 康国政, Thermo-mechanically coupled cyclic elasto-viscoplastic constitutive model of metals: theory and application, International Journal of Plasticity, 2016 （SCI ）
109. 康国政, Experimental observation on multiaxial ratchetting of polycarbonate polymer at room temperature, Polymer Testin, 2016 （SCI ）
110. 康国政, Closed-form field in an infinite space of transversely isotropic multiferroic composite medium with an elliptical or penny-shaped crack: 3D exact analysis, International Journal of Solids and Structures, 2016 （SCI ）
111. 康国政, Viscoelastic-viscoplastic cyclic deformation of polycarbonate polymer: experiment and constitutive model, Journal of Applied Mechanics, 2016 （SCI ）
112. 康国政, In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate, Tribology International,, 2016 （SCI ）
113. 康国政, Review on structural fatigue of NiTi shape memory alloys: pure mechanical and thermo-mechanical fatigue, Theoretical and Applied Mechanics Letters, 2016 （SCI ）
114. 康国政, Crack tip plasticity of a half-infinite Dugdale crack embedded in an infinite space of one-dimensional hexagonal quasi-crystal, Mechanics Research Communications, 2015 （SCI ）
115. 康国政, A visco-elastic-plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate, Polymer Engineering and Science, 2015 （SCI ）
116. 康国政, Uniaxial cyclic deformation behavior and thermal effect of ultra-high molecular weight polyethylene, Journal of Polymer Research, 2015 （SCI ）
117. 康国政, Crack tip plasticity of a thermal loaded penny-shaped crack in an infinite space of 1D QC, Acta Mechanica Solida Sinica, 2015 （SCI ）
118. 康国政, An efficient computational approach to evaluate the ratcheting performance of rail steels under cyclic rolling contact in service, International Journal of Mechanical Science, 2015 （SCI ）
119. 康国政, Correlating the internal length in strain gradient plasticity theory with the microstructure of material, Philosophical Magazine Letters, 2015 （SCI ）
120. 康国政, A new form of equivalent stress for combined axialu2013torsional loading considering the tensionu2013compression asymmetry of polymeric materials, RSC Advances, 2015 （SCI ）
121. 康国政, Non-proportional multiaxial whole-life transformation ratchetting and fatigue failure of super-elastic NiTi shape memory alloy micro-tubes, International Journal of Fatigue, 2015 （SCI ）
122. 康国政, Damage-based life prediction model for uniaxial low-cycle stress fatigue of super-elastic NiTi shape memory alloy micro-tubes, Smart Materials and Structures, 2015 （SCI ）
123. 康国政, Rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy: thermo-mechanical coupled and physical mechanism-based constitutive model, International Journal of Plasticity, 2015 （SCI ）
124. 康国政, New micromechanical constitutive model for anisotropic cyclic deformation of super-elastic NiTi shape memory alloy single crystal, Journal of Mechanics and Physics of Solids, 2015 （SCI ）
125. 康国政, Fundamental elastic field in an infinite medium of two-dimensional hexagonal quasicrystal with a planar crack: 3D exact analysis, International Journal of Solids and Structures, 2015 （SCI ）
126. 康国政, Experimental observations on uniaxial whole-life transformation ratchetting and low-cycle stress fatigue of super-elastic NiTi shape memory alloy micro-tubes, Smart Materials and Structures, 2015 （SCI ）
127. 康国政, Fundamental thermo-electro-elastic solutions for 1D hexagonal QC with piezo-electric effect, Zeitschrift für Angewandte Mathematik und Mechanik, 2015 （SCI ）
128. 康国政, Accelerated ratcheting testing of polycarbonate using the time-temperature-stress equivalence method, Polymer Testing, 2015 （SCI ）
129. 康国政, An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights, Materials & Design, 2015 （SCI ）
130. 康国政, Effect of martensite reorientation on multiaxial transformation ratchetting of super-elastic NiTi shape memory alloy: new consideration in constitutive model, International Journal of Plasticity, 2015 （SCI ）
131. 康国政, Study on the rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy based on a new crystal plasticity constitutive model, International Journal of Solids and Structures, 2014 （SCI ）
132. 康国政, Dynamic stress-strain behavior of frozen soil: experiments and modeling, Cold Regions Science and Technology, 2014 （SCI ）
133. 康国政, Experimental studies on the uniaxial ratchetting of polycarbonate polymer at different temperatures, Polymer Testing, 2014 （SCI ）
134. 康国政, Finite element analysis on bending fretting fatigue of 316L stainless steel considering ratchetting and cyclic hardening, International Journal of Mechanical Science, 2014 （SCI ）
135. 康国政, A physical mechanism based constitutive model for temperature-dependent transformation ratchetting of NiTi shape memory alloy, Mechanics of Materials, 2014 （SCI ）
136. 康国政, A single parameter to evaluate stress state in rail head for rolling contact fatigue analysis, Fatigue & Fracture of Engineering Materials & Structures, 2014 （SCI ）
137. 康国政, Ratchetting behaviour of high strength rail steels under bi-axial compression-torsion loadings, International Journal of Fatigue, 2014 （SCI ）
138. 康国政, A dislocation-based cyclic polycrystalline visco-plastic constitutive model for ratchetting of metals with face-centered cubic crystal structure, Computational Materials Science, 2014 （SCI ）
139. 康国政, A finite viscoelastic-plastic model for describing the uniaxial ratchetting of soft biological tissues, Journal of Biomechanics, 2014 （SCI ）
140. 康国政, Uniaxial ratcheting of extruded AZ31 magnesium alloy: Effect of mean stress, Materials Science and Engineering A, 2014 （SCI ）
141. 康国政, Macroscopic and microscopic observations on uniaxial ratchetting of two-phase Ti-6Al-4V alloy, Materials Characterization, 2014 （SCI ）
142. 康国政, Non-proportionally multiaxial transformation ratchetting of super-elastic NiTi shape memory alloy: experimental observations, Mechanics of Materials, 2014 （SCI ）
143. 康国政, A micromechanical constitutive model considering different mechanisms of inelastic deformation for NiTi shape memory alloy, International Journal of Plasticity, 2014 （SCI ）
144. 康国政, Logarithmic stress rate based cyclic constitutive model in finite plasticity, International Journal of Plasticity, 2014 （SCI ）
145. 康国政, Crystal plasticity based constitutive model for the ratchetting of polycrystalline magnesium alloys, Computational Materials Science, 2014 （SCI ）
146. 康国政, Effect of martensite plasticity on cyclic deformation of super-elastic NiTi shape memory alloy, Smart Materials and Structures, 2014 （SCI ）
147. 康国政, Effects of tangent operators on prediction accuracy of meso-mechanical constitutive model of elasto-plastic composites, International Journal of Computational Methods, 2014 （SCI ）
148. 康国政, Advances in transformation ratcheting and ratcheting-fatigue interaction of NiTi shape memory alloy, Acta Mechanica Solida Sinica, 2013 （SCI ）
149. 康国政, Dynamic behavior of frozen soil under uniaxial strain and stress conditions, Applied Mathematics and Mechanics, 2013 （SCI ）
150. 康国政, Simulation to the cyclic deformation of polycrystalline aluminum alloy using crystal plasticity finite element method, International Journal of Computational Materials Sciences and Engineering, 2013 （SCI ）
151. 康国政, Mechanical property measurements of the fresh ratu2019s whiskers by nano-indentation, Materials Research Bulletin, 2013 （SCI ）
152. 康国政, A test procedure for separating viscous recovery and accumulated unrecoverable deformation of polymer under cyclic loading, Polymer Testing, 2013 （SCI ）
153. 康国政, A truncated conical beam model for analysis of the vibration of rat whiskers, Journal of Biomechanics, 2013 （SCI ）
154. 康国政, Multiaxial ratchetting of 20 carbon steel: macro- and microscopic experiments, Materials Characterization, 2013 （SCI ）
155. 康国政, Oliver-Pharr method in spherical indentation test of shape memory alloys, Journal of Mechanics and Physics in Solids, 2013 （SCI ）
156. 康国政, Three-dimensional thermo-elasticity field in a heterogeneous circular plate of transverse isotropic material, Mathematics and Mechanics of Solids, 2013 （SCI ）
157. 康国政, A micromechanical constitutive model based on crystal plasticity for thermo-mechanical cyclic deformation of NiTi shape memory alloy, International Journal of Plasticity, 2013 （SCI ）
158. 康国政, Study on bending fretting fatigue of LZ50 axle steel considering ratchetting by finite element method, Fatigue & Fracture of Engineering Materials & Structures, 2013 （SCI ）
159. 康国政, A cyclic visco-plastic constitutive model for time-dependent ratchetting of particle-reinforced metal matrix composites, International Journal of Plasticity, 2013 （SCI ）
160. 康国政, Viscoelastic constitutive model for uniaxial time-dependent ratcheting of polyetherimide (PEI) polymer, Polymer Engineering and Sciences, 2012 （SCI ）
161. 康国政, Penny-shaped Dugdale crack in a transverse isotropic medium, International Journal of Fracture, 2012 （SCI ）
162. 康国政, Finite element implementation of a super-elastic constitutive model for transformation ratcheting of NiTi alloy, International Journal of Computational Methods, 2012 （SCI ）
163. 康国政, Temperature-dependent polycrystalline constitutive model considering plasticity for super-elastic NiTi shape memory alloy, Computational Materials Science, 2012 （SCI ）
164. 康国政, Whole-life transformation ratchetting and fatigue of super-elastic NiTi alloy under uniaxial stress-controlled cyclic loading, Materials Science and Engineering A, 2012 （SCI ）
165. 康国政, Dislocation evolution of 316L stainless steel during multiaxial ratchetting deformation, Materials Characterization, 2012 （SCI ）
166. 康国政, Constitutive model for time-dependent ratcheting behavior of 6061-T6 aluminum alloy, Computational Materials Science, 2012 （SCI ）
167. 康国政, A damage-coupled multi-axial time-dependent low cycle fatigue failure model for SS304 stainless steel at high temperature, Acta Metallurgica Sinica-English Letters, 2011 （SCI ）
168. 康国政, Uniaxial ratchetting behaviours of metals with different crystal structures or values of fault energy: macroscopic experiments, Journal of Materials Science and Technology, 2011 （SCI ）
169. 康国政, Meso-mechanical constitutive model for ratchetting of particle-reinforced metal matrix composites, International Journal of Plasticity, 2011 （SCI ）
170. 康国政, Uniaxial ratchetting of 20 ordinary low-carbon steel: Macroscopic and microscopic experimental observations, Materials Science and Engineering A, 2011 （SCI ）
171. 康国政, Ratchetting of porcine skin under uniaxial cyclic loading, Journal of the Mechanical Behavior of Biomedical Materials, 2011 （SCI ）
172. 康国政, Cyclic polycrystalline viscoplastic model for ratchetting of 316L stainless steel, Computational Materials Science, 2011 （SCI ）
